TES-3082 True RMS Clamp Meter


EN61010-1
600V INSTALLATION VAT III
POLLUTION DEGREE2

  • Auto-Ranging Frequency measurements
  • Auto ZERO mode
  • Data Hold mode
  • PEAK Hold mode
  • True RMS Reading

A: General Measurement

Voltage (AC/DC)
Range DC - 600V
AC - 400V/ 600V
Accuracy DC - 0.75% rdg + 2 dgts
AC - 1.2%rdg + 5dgts
Input Impedance 10MΩ
Overload Protection DC 1000V & AC 750V
Frequency (Hz)
Range 4KHz/40KHz
Accuracy 0.5% rdg + 5dgts
Resolution 0.1Hz/1Hz
Max Input Sensitivity 5A/1V
Overload Protection 800A/750V
Audible Continuity
Continuity beeper below 40 Ω
Accuracy Max Open Circuit Voltage 3.2V
Overload Protection 660Vrms
Ohms (Resistance)
Range 4K Ω
Accuracy 1% rdg + 5dgts
Resolution 0.001K Ω
Max Open Circuit Voltage 0.5VDC
Overload Protection 660Vrms
Current (DC/AC)
Range 400/600A
Accuracy 2% rdg + 5 dgts
Resolution 0.1/1A
Overload Protection 800A
Diode Test
Resolution 0.001V
Accuracy 1% rdg + 2 dgts
Overload Protection 660Vrms

B: Peak Hold Measurement

Current (AC)
Range 400/600A
Accuracy 2% rdg + 10 dgts
Resolution 0.1A/1A
Overload Protection 800A
Voltage (AC)
Range 400/600V
Accuracy 1.5% rdg + 10 dgts
Resolution 0.1V/1V
Input Impedance 10M Ω
Overload Protection DC 1000V & AC 750V

Numerical Display:
3 3/4 digit liquid crystal display (LCD) maximum
reading 3999.

Sampling Rate: 2 times/sec

Power Source:
one 006p 9V or IEC 6F22 or NEDA 1604 Battery

Dimensions: 239(L) x 66(W) x 34(H) mm

Weight: Approx. 465g

Water Analysis