OWON HDS-N Series digital oscilloscope
Product Series : Handheld DSO

HDS NMain Features

- 2 in 1 (DSO + Multimeter)
- Auto-scale Function
- FFT
- 20 group automatic measurement options
- Bandwidth : 20MHz - 200MHz
- USB data transmission supported
- Multimeter newly supported SCPI
- Rechargeable Li-ion battery (6 hours' backup)
- Waveform record & replay

Application

electronic circuit debugging                circuit testing    

design and manufacture                     education and training

automobile maintenance and testing

「Digital Storage Oscilloscope」Performance Specifications

Model HDS1022M-N HDS2062M-N HDS3102M-N HDS4202M-N
Bandwidth 20MHz 60MHz 100MHz 200MHz
Sample Rate (real time ) 100MS/s 1GS/s
Horizontal Scale (s/div)

5ns/div~100s/div,

 step by 1~2.5~5

5ns/div~100s/div, step by 1~2~5 2ns/div~100s/div, step by 1~2~5

Rise Time 

(at input, typical)

≤ 17.5ns ≤ 5.8ns ≤ 3.5ns ≤ 1.7ns
Display 3.8 inch color display with TFT panel (640 × 480 pixels, 65535 colors)
Channel dual
Input Impedance 1MΩ ± 2%, in parallel with 20pF ± 5pF 1MΩ ± 2%, in parallel with 15pF ± 5pF
Record Length max 6000 points on each channel
Interpolation sin (x) / x
Probe Attenuation Factor 1X,10X,100X,1000X
Input Coupling DC, AC, and GND
DC Accuracy (average) average >16 : ±(5% reading + 0.05div) for △V
Vertical Sensitivity 5mV/div~5V/div (at input)
Vertical Resolution (A/D) 8 bits (2 channels simultaneously )
Max Input Voltage

400V (PK - PK) (DC + AC, PK - PK, 1MΩ input impedance, 

probe attenuation 10 : 1), CAT II

Trigger Type Edge, Video, Alternate
Trigger Mode Auto, Normal, Single
Trigger Level ±6 divisions from screen center
Acquisition Mode Sample, Peak Detect, and Average
DC Gain Accuracy ±3%
Automatic Measurement Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A→B↑, Delay  A→B↓, +Width, -Width, +Duty, -Duty
Waveform Math +, -, ×, ÷, FFT
Waveform Storage 4 waveforms
Lissajous   Figure  Bandwidth full bandwidth  
Phase Difference ±3 degrees
Communication Interface  USB
Power Supply  100V-240V AC, 50/60Hz
Li-ion Battery  7.4V, 6 hours operation
 Dimensions (W × H × D)  180 × 115 × 40 (mm)
 Weight (without package)  645 g


Multimeter Specifications 

Full Scale Reading 3(3/4) digit (max 4000-count) diode 0V-1.5V
Input Impedance 10 MΩ On / Off measurement < 50 (± 30) beeping
Voltage VDC : 400mV, 4V, 40V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V VAC : 4V, 40V, 400V : ±(1% ± 3 digits), 750V : ±(2% ± 3 digits); Frequency : 40Hz - 400Hz; max input : AC 400V (virtual value)
Current DC : 40mA, 400mA : ±(1.5% ± 1 digit), 10A : ±(3% ± 3 digits) AC : 40mA : ±(1.5% ± 3 digits), 400mA : ±(2% ± 1 digit), 10A : ±(5% ± 3 digits)
Impedance 400Ω : ±(1% ± 3 digits), 40ΚΩ - 4ΜΩ : ±(1% ± 1 digit), 40MΩ : ±(1.5% ± 3 digits)
Capacitance 51.2nF - 100uF : ±(3% ± 3 digits)

Water Analysis