TES-45 CAT-5 Lan Cable Tester


  • Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc.
  • Can tests for wiring faults such as open, short , reversed , crossed and split wires.
  • Can identify up to 4 different cables at one end by provided remote identifiers.
  • Double digital 14-segment LED and 4 pair LEDs clearly display the fault status.
  • Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking.
  • Simple and effective use.
  • Auto power off

Display/LEDs Double digital 14-segment LED
Four FAIL (red) LEDs
Four Pass (green) LEDs
Connector RJ45, BNC
Cable pairs tested 1/2 , 3/6 , 4/5 , 7/8
Faults status Open , Short , Reversed , Crossed , Split and Low Battery
Test cable length Minimum : 1.2M (4ft) ,
Maximum : 150M (492ft)
Power 9Volt battery
Size 170 x 52 x 38mm
Weight Approx. 180g
Environment Conditions Operating : 0 ℃ to +50 ℃
Storage : -20 ℃ to +60 ℃
Accessories Instruction manual, One patch cable (RJ-45 to RJ-45,30cm long) &
One remote identifier #1(Optional for A #2, #3 & #4 )
(Optional for B #5, #6, #7 & #8)

Water Analysis