HDS-I handheld DSO w/ channel isolation
Product Series : Handheld DSO
Main Features
+ 2 in 1 (DSO + Multimeter)
+ with good ISOLATION between channels
+ Auto-scale function
+ FFT function
+ 20 group automatic measurement options
+ Bandwidth : 20MHz
+ USB data transmission supported
+ Rechargeable Li-ion battery
+ Multimeter newly supported SCPI
Application
electronic circuit debugging circuit testing
design and manufacture education and training
automobile maintenance and testing
HDS-I handheld DSO w/ channel isolation
Product Series : Handheld DSO
Main Features
+ 2 in 1 (DSO + Multimeter)
+ with good ISOLATION between channels
+ Auto-scale function
+ FFT function
+ 20 group automatic measurement options
+ Bandwidth : 20MHz
+ USB data transmission supported
+ Rechargeable Li-ion battery
+ Multimeter newly supported SCPI
Application
electronic circuit debugging circuit testing
design and manufacture education and training
automobile maintenance and testing
- See more at: http://www.owon.com.hk/products_info.asp?ParentID=57&SortID=62&ProID=185#sthash.tf4FBdOy.dpufPerformance Specifications
| Model | HDS1022M-I | |
| Bandwidth | 20MHz | |
| Sample Rate | 100MS/s | |
| Rise Time (at input, typical) | ≤17.5ns | |
| Record Length | 6K points | |
| Channel | dual, insulated ground of 1000 : 1 | |
| Display | 3.7'' color TFT LCD, 640 x 480 pixels | |
| Floating Meas. Channel | insulated input ground between multimeter / oscilloscope mode | |
| Input Coupling | DC, AC, and GND | |
| Input Impedance | 1MΩ±2%, in parallel connection with 15pF± 5pF | |
| Horizontal Scale (s/div) | 5ns/div - 100s/div, step by 1 - 2 - 5 | |
| Interval (△T) Accuracy | single: ±(1 interval time + 100ppm x reading + 0.6ns), average>16: ±(1 interval time + 100ppm x reading + 0.4ns) |
|
| Vertical Sensitivity | 5mV/div - 5V/div (at input ) | |
| Vertical Resolution | 8 bits | |
| Max Input Voltage | 400V (DC + AC / PK - PK, 1MΩ input impedance, probe attenuation in 10 : 1) | |
| Trigger Type |
Edge | rising edge, falling edge |
| Video | line, field, random line, odd / even fields | |
| Alternate | ||
| Trigger Mode | Auto, Normal, and Single | |
| Automatic Measurement |
Vpp, Vavg, Vrms, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty |
|
| DC Accuracy (average) | average>16: ±(5% reading 0.05 div) for △V | |
| Waveform Math | ＋, －, *, / , FFT, invert | |
| Waveform Storage | 4 waveforms | |
| Lissajous Figure |
Bandwidth | full bandwidth |
| Phase Difference | ±3 degrees | |
| Cursor Measurement | △V, and △T between cursors | |
| Communication Interface | USB host, and USB device | |
| Battery | built-in Li-ion battery, 7.4V / 3500mAh | |
| Dimension (W / H / D) | 180 x 113 x 40 mm | |
| Weight | 645 g | |
Multimeter Specifications
| Full Scale Reading | 3(3/4) digit (max 4000-count) | Diode | 0V - 1.5V |
| Input Impedance | 10 MΩ | On / Off Test | < 50 (± 30) beeping |
| Voltage |
VDC : 400mV, 4V, 400V : ±(1% ± 1 digit); max input : DC 400V 40Hz - 400Hz;max input : AC 750V (virtual value) |
||
| Current | DCA: 40mA, 400mA: ±(1.5% ±1 digit), 10A: ±(3% ± 3 digits) ACA: 40mA: ±(1.5% ± 3 digit); 400mA: ±(2 ± 1 digit); 10A: ±(3% ± 3 digits) |
||
| Impedance | 400Ω: ±(1% ± 3 digits); 4KΩ / 40KΩ / 400 KΩ / 4MΩ: ±(1% ± 1 digit); 40MΩ: ±(1.50% ± 3 digits) | ||
| Capacitance | 51.2nF - 100uF : ±(3% ± 3 digits) | ||