TES-133 Luminous Flux Meter

 

  • 4-digit LCD reading.
  • Spectral Sensitivity close to CIE photopic Curve.
  • Auto ranging from 0.05 to 7000 lumens.
  • Accurate and Instant response.
  • Data Hold function.
  • Data memory and read function.
  • Zero function.
  • Ratio function.
  • Sort function.
  • Comparator function.
  • Best for measuring : LEDs, Small lamps, Fiber illuminators.
  • Auto power off function.
  • RS232 Interface.
  • Easy to use.
  • Adapters kit : 2/3/4/5/8/10m/m

Display 4 digit LCD read out
Measuring Range 9.999, 99.99, 999.9, 7000 lumens, Auto ranging (4 step)
Overrange Display OL is displayed
Resolution 0.001 lumens
Accuracy 0.05 to 0.1 ±7%, 0.1 to 1000 ±1%, 1000 to 7000 ±3%
Integrating Sphere Diameter 50mm
Sample pore 12.7mm diameter
CIE photopic f ’1 ≦6%
Temperature Characteristics ±0.1%/℃
Measuring Rate Approximately 5 time/sec
Photosensor Silicon photodiodes
Data Memory Capacity 999 sets. (Direct reading from LCD display)
Data Logger Capacity 40000 sets
Operating/Storage Conditions 0℃ ~ 50℃ <80% RH , -10℃ ~ 60℃ <70%RH
Power Source 6 pcs AAA size Battery
Battery Life (typical) 100 hours
Integrating sphere Lead Length 150 cm (approx.)
Integrating sphere Dimensions 68(Diameter) × 82(H)mm
Dimension 150(L) × 72(W) × 35(H)mm
Weight 470g
Accessories Carrying case, Instruction manual, Battery, CD software, RS232 cable, AC adaptor, Adapter kit.
Electronic Test

Environment Testing

Electrical Test

Water Analysis

Surveying Equipments