TES-135 Color Meter


  • Maximum, Minimum and Average function.
  • Tolerance function.
  • Auto memory (99 sets) & Read function.
  • RS232 interface.

 


 

 

 

 

Display Triple 4 digit LCD display
Illuminating /
Viewing geometry
45° / 0° – 1 illumination at 45°, measurement at 0°
Measuring area Approx.f10mm
Display modes Color difference
Δ(L*,a*,b*), Δ(E*ab,C*ab, H*ab),Δ(Y, x, y), Δ(X, Y, Z) or Δ(Rs, Gs, Bs)
Color space
(L*, a*, b*), (L*, C*ab, hab), (Y, x, y), (X, Y, Z) or (Rs, Gs, Bs).
Target color memory 8 channel ; set by measurement or keypad
Measuring range L* : 10 to 100
Measurement conditions Observe : CIE 2° Standard Observer.
Illuminant : White LED lamp.
Repeatability Standard deviation within ΔE*ab 0.5
(Measurement conditions : Average of measurements of standard white plate).
Minimum interval
between measurements
Approx. 2 seconds
Auto data Memory
& Read
99 sets
Auto power off Approx. 3 minutes
Power source One 9V battery and DC 9V AC adapter input
Battery life Approx. 500 measurements at 10 – sec intervals
Operating temperature/
humidity range
0°C to 40°C (32°F to 104°F) ; less than 85% relative humidity
Storage temperature/
humidity range
-10°C to 40°C (14°F to 104°F) ; less than 70% relative humidity
Dimensions 172mm × 118mm × 46mm
Weight Approx. 220g
Accessories Instruction manual, Battery, RS232 cable, software CD.
  • Check the color difference between two samples.
    • Color difference displayed

      Δ(L*,a*,b*)

      Δ(E*ab,C*ab, H*ab)

      Δ(Y, x, y)

      Δ(X, Y, Z) or

    Δ(Rs, Gs, Bs)
    • Color space displayed

      (L*, a*, b*)

      (L*, C*ab, hab)

      (Y, x, y)

      (X, Y, Z) or

    (Rs, Gs, Bs)
  • Maximum, Minimum and Average function.
  • Tolerance function.
  • Auto memory (99 sets) & Read function.
  • RS232 interface.

Water Analysis