XSA1015 Spectrum Analyzer
Product Series : XSA1000 Series
Main Features
- Frequency Range from 9 kHz up to1.5 GHz
-150dBm Displayed Average Noise Level
- Phase Noise -85dBc/Hz @1Gz and offset at 10KHz
- Total Amplitude Accuracy <1.5dB
- 10Hz Minimum Resolution Bandwidth (RBW)
- EMI Pre-compliance Test Kit
- 1.5 GHz Tracking Generator Kit
- 10.4 inches display
|
Frequency Specification |
|
|
Frequency |
|
|
Range |
9kHz-1.5 GHz |
|
Resolution |
1Hz |
|
Frequency span |
|
|
Range |
0 Hz, 100 Hz to maximum frequency of device |
|
Accuracy |
± span / (swept points -1) |
|
Internal reference |
|
|
Reference frequency |
10.000000 MHz |
|
Reference frequency accuracy |
±[(days from last calibrate × freq aging rate) + temperature stability + initial accuracy ] |
|
Temperature stability |
<2.5ppm (15℃ to 35℃) |
|
Aging rate |
<1ppm / year |
|
Readout |
|
|
Marker frequency resolution |
span/(the number of sweep points -1) |
|
Uncertainty |
±(freq indication × freq reference uncertainty +1%× span +10%× resolution bandwidth + Marker Frequency Resolution) |
|
Frequency counter |
|
|
Resolution |
1 Hz, 10 Hz, 100 Hz, 1 kHz |
|
Accuracy |
±(marker freq × freq reference uncertainty + counter resolution) |
|
Bandwidth |
|
|
Resolution bandwidth (-3 dB) |
10Hz to 500kHz(in 1 to 10 sequence), 1MHz, 3MHz |
|
Resolution filter shape factor |
<5 : 1 nominal(Digital implement, similar to Gauss Pattern) |
|
Accuracy |
<5% nominal |
|
Video bandwidth (-3 dB) |
10Hz to 3MHz |
|
|
|
|
Amplitude and electric level |
|
|
Amplitude measurement range |
DANL to +20 dBm, close the preamplifier |
|
Reference electric level |
-80 dBm to +30 dBm, 0.1dBm steps |
|
Preamplifier |
20 dB, nominal, 9 kHz - 1.5 GHz |
|
Input attenuator range |
0 - 39 dB, 3 dB steps |
|
Max input DC voltage |
50 VDC |
|
Max continuous power |
30dBm, average continuous power |
|
Displayed average noise level (DANL), Input attenuation 0 dB, 1Hz resolution bandwidth |
|
|
Preamp off |
1 MHz - 10 MHz -130dBm(nominated)； |
|
10 MHz - 1GHz -130dBm(nominated)； |
|
|
1GHz - 1.5 GHz -128 dBm( nominated ) |
|
|
Preamp on |
1 MHz - 10 MHz -150dBm(nominated)； |
|
10 MHz - 1GHz -150dBm(nominated)； |
|
|
1GHz - 1.5 GHz -148 dBm (nominated) |
|
|
Phase noise (20 ℃ - 30 ℃, fc=1 GHz) |
|
|
Phase noise |
<-85 dBc/Hz @10 kHz offset, |
|
<-100 dBc/Hz @100 kHz offset |
|
|
<-110 dBc/Hz @1 MHz offset |
|
|
Level display range |
|
|
Log scale coordinate |
1dB - 255dB |
|
Linear scale coordinate |
0 to reference level |
|
level unit |
dBm,dBuW,dBpW,dBmV,dBuV, W,V |
|
Points |
201 - 1001 |
|
Number of traces |
5 |
|
Detectors |
Positive-peak, negative-peak, sample, normal, RMS |
|
Trace functions |
Clear write, Max Hold, Min Hold, View, Blank, Average |
|
Frequency response (20℃ - 30℃, 30% - 70% relative humidity, 20 dB input attenuation, reference 50 MHz) |
|
|
Preamp off |
±0.8 dB； |
|
Preamp on |
±0.9 dB； |
|
Accuracy |
|
|
Input Attenuation Switching Uncertainty |
20℃ - 30℃, fc=50 MHz, Preamplifier Off, 20dB RF attenuation, input signal 0 - 39 dB |
|
Absolute Amplitude Uncertainty |
20℃ - 30℃, fc=50 MHz, RBW=1 kHz, VBW=1 kHz, peak detector, 20 dB RF attenuation, |
|
Uncertainty |
input signal range 0dbm - -50dbm |
|
±1.5 dB |
|
|
VSWR |
input 10 dB RF attenuation, 1 MHz - 1.5GHz |
|
<1.5, nominal |
|
|
Distortion and spurious response |
|
|
Second harmonic distortion |
fc ≥ 50 MHz, Preamp off, signal input -30 dBm, 0 dB RF attenuation, 20 ℃ to 30 ℃ |
|
-60dbc |
|
|
Third-order intermodulation |
fc ≥ 50 MHz |
|
+13 dBm |
|
|
1 dB Gain Compression |
fc ≥ 50 MHz, 0 dB RF attenuation, Preamp off , 20 ℃ to 30 ℃ |
|
+7 dBm, nominal |
|
|
Residual response |
connect 50 Ω load at input port, 0 dB input attenuation, 20 ℃ to 30 ℃ |
|
<-85dBm, nominated |
|
|
Input related spurious |
-30 dBm signal at input mixer, 20 ℃ to 30 ℃ |
|
<-60 dBc |
|
|
Sweep time and triggering |
|
|
Span range |
100Hz≤SPAN≤3GHz 10ms to 3000s |
|
Mode |
Continue, single |
|
Trigger |
Free run, video, external |
|
Tracking generator |
|
|
Output frequency range |
100 kHz - 1.5 GHz |
|
Output power level range |
-30 dBm - 0 dBm , |
|
Output power level resolution |
1DB |
|
Output flatness |
+/-3 dB |
|
Maximum safe reverse level |
Average total power : 30 dBm, DC : ±50 VDC |
|
Inputs and Outputs |
|
|
Front panel RF input connector |
50 Ω, N-type female |
|
Front panel track generator output |
50 Ω, N-type female |
|
10 M reference input |
50 Ω, N-type female |
|
Communication port |
USB HOST, USB DEVICE, LAN, earphone port, and VGA |
|
General techincal specification |
|
|
Display |
TFT LCD, 10.4 inches |
|
Weight |
5 kg |
|
Working temperature |
0 - 40 ℃ |
|
Storage temperature |
-20 °C to 60 °C |
|
Power |
100V - 240V 50/60Hz |