DC/AC Current Clamp Meter

Clamp Meter/Trms Clamp Meter

• Variable-frequency drives (VFD) V & Hz measurement.
• LoZ voltage measurement to drain ghost voltages.
• Check 3 phase sequence.
• Motor Inrush current measurement.
• True RMS reading on AC and DC+AC mode. (3901)
• uA measurement for HVAC flame sensors. (3901)

CM-01

DC/AC Clamp Meter

• High Resolution DC/AC 10mA
• 23 mm Large Jaw Diameter
• One Touch Zero for DCA adjustment

CM-02
CM-04

Clamp Meter/
Automotive Clamp

• DC/AC 0.01A Resolution
• AC/DC 0.01A~200A
• 23mm Jaw Diameter
• One Touch Zero
• Temperature and Capacitance
• Auto Range V、W、Hz、℃、
• 3 3/4 Digits (4000 Counts)
• 0~9999 RPM(CM-04)

• 10 mA Ultra High Resolution
• Large Conductor Diameter (30mm)
• ACA 5 Ranges (40mA, 400mA, 4A, 40A, 100A)

• Accurate and High Resolution
• 23 mm Conductor Diameter
• One Touch Zero

• High Resolution DC 10mA, AC 1mA
• True RMS
• Non-contact Current Frequency
  Measurement

• Super High Resolution DC 1mA,
  AC 0.1mA
• One Touch Zero for DCA
• True RMS

• High Resolution DC 1mA, AC 0.1mA
• Connect to an Oscilloscopes to observe Current Waveform
• Connect to Chart Recorder / Datalogger / DMM to Record Current Data

• DC/AC 2000A
• Cable f 55mm, Bus Bar 72mm(D) x 22mm(W)
• True RMS (2000)
• Average Sensing (2003)
• DCA One Touch Zero
• Auto Range A, V, W
• Continuity
• Max/Min/Hold

• AC+DC 1200KW
• DC/AC 2000A & ANALOG OUTPUT
• Cable F 55mm
• True RMS
• Temperature ( ℃ or ℉ )
• 0.1 ℃ / ℉ Resolution

• ACA: 20A, 200A, 600A
• Continuity Buzzer
• Unit & Sign Display

• 3-3/4 Digital LCD with bar-graph
• Auto-power off with Data Hold and MAX/MIN mode
• Zero Adjustment/Relative Reading

• 3-3/4 Digital LCD with bar-graph
• Auto-ranging off / Data Hold / Peak Hold / MAX/MIN mode
• Zero Adjustment/Relative Reading

• Capacitance Measurement (400μF).
• MAX / MIN / Data Hold.
• Phase Rotation Indicator.
• Pos Peak Hold & Neg Peak Hold.
• 1000A AC & 600V AC.

• Check current draw in motors and compressors.
• Use MAX/MIN/Recording in the temperature mode to assess efficiency.
• Test run/start capacitors.
• Confirm low voltage control signals.
• Measure flame safeguard device current draw.

• Auto-Ranging Frequency measurements
• Auto ZERO mode
• Data Hold mode
• PEAK Hold mode
• True RMS Reading

• 3-1/2 Digital LCD, 2000 count.
• Pocket size.
• MAX hold / Data hold function.

• 3-1/2 Digital LCD, 2000 count.
• Pocket size.
• MAX hold / Data hold function.
• One touch DCA zero.

OWON DCM Series Digital Clamp Meter

- Auto- / manual range function
- Over-range protection
- Display count: 2000
- Automatic negative polarity display