OWON XDS3000-E Series 4Channel Osciloscope

4ch digital osciloscopeMain Features

+ 60MHz / 100MHz Bandwidth,1GS/s sample rate
+ 8-bit, 12-bit or 14-bit high resolution ADC
+ 40M record length 45,000 wfms/s waveform refresh rate
+ low back ground noise
+8 inch 800 x 600 high resolution LCD, optional multi-touch screen, more user-friendly operation experience
+ SCPI, and LabVIEW supported
+ multi- trigger, and bus decoding function
+ multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and VGA 

Application

electronic circuit debugging       circuit testing      
design and manufacture            education and training 

 

Model XDS3064E XDS3104E XDS3064AE XDS3104AE
Bandwidth 60MHz 100MHz 60MHz 100MHz
Sample Rate 1GS/s
Vertical Resolution (A/D)) 8 bits 14 bits
Record length 40M
Waveform Refresh Rate 45,000 wfms/s
Horizontal Scale (s/div)) 2ns/div - 1000s/div, step by 1 - 2 - 5
Rise Time (at input, typical) ≤5.8ns ≤3.5ns ≤5.8ns ≤3.5ns  
Channel 4
Display 8" color LCD, 800 x 600 pixels display
Input Impedance 1MΩ ± 2%, in parallel with 15pF ± 5pF
Channel Isolation 50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage 1MΩ ≤ 300Vrms;
DC Gain Accuracy ±3%
DC Accuracy average≥16:±(3% +0.05div) for △V
Probe Attenuation Factor 0.001X - 1000X, step by 1 - 2 - 5
LF Respond (AC, -3dB) ≥5Hz
Sample Rate / Relay Time Accuracy ±1ppm
Interpolation (sinx) / x,x
Interval (△T) Accuracy
(full bandwidth)
Single: ±(1 interval time + 1ppm x reading + 0.6ns);
Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns)
Input Coupling DC, AC, GND
Vertical Sensitivity 1mV/div - 10V/div (at input)
Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232,
and CAN (optional)
Bus Decoding(optional) I2C, SPI, RS232, CAN
Trigger Mode Auto, Normal, and Single
Vertical Range ±2V(1mV/div~50mV/div);±20V(100mV/div~1V/div);±200V(2V/div~10V/div)
Line / Field Frequency (video) NTSC, PAL and SECAM standard
Cursor Measurement △V, and △T between cursors, △V and △T between cursors, and auto- cursors
Automatic Measurement Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑,    Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area 
Waveform Math +, -, ×, ÷, FFT
Waveform Storage 100 waveforms
Lissajou's
Figure
full bandwidth Full bandwidth
±3 degrees ±3 degrees
Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)
Frequency Counter available
Power Supply 100V - 240V AC, 50/60Hz, CAT II
Fuse 2A, T class, 250V
Battery (optional) 3.7V, 13200mA
Dimension (W x H x D) 340mmx177mmx90mm

+ Multimeter (optional) Specifications

Full Scale Reading 3¾ digits (max 4000 count) Diode 0V -1.5V
Input Impedance 10MΩ Continuity Test <50 (±30) beeping
Capacitance 51.2nF - 100uF: ±(3% ± 3 digits)
Voltage DCV: 400mV, 4V, 400V: ±(1 ± 1 digit); max input: DC 1000V
ACV: 4V, 40V, 400V: ±(1 ± 3 digits); frequency: 40Hz - 400Hz; max input: AC 750V (virtual value)
Current DCA: 40mA, 400mA: ±(1.5% ± 1 digit); 10A: ±(3% ± 3 digits)
ACA: 40mA: ±(1.5% ± 3 digits), 400mA: ±(2% ± 1 digit), 10A: ±(3% ± 3 digits)
Impedance 400Ω: ±(1% ± 3 digits),4KΩ - 40MΩ: ±(1% ± 1 digit)

+ Arb Waveform Generator (optional) Specifications

Max Frequency Output 25MHz
Sample Rate 125MS/s
Channel 2 channel ( only apply to XDS3064E, XDS3104E )
Vertical Resolution 14 bits
Amplitude Range 2mVpp - 6Vpp
Waveform Length 8K
Standard Waveform Sine, Square, Pulse, Ramp
Arbitrary Waveform Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, Noise, and others, total 46 built-in waveforms, and user-defined arbitrary waveform

+ Optional Module / Function

VGA VGA+AV port
WIF Wifi
AWG arb waveform generator
DMM digital multimeter
MTS Touch screen(capacitor-type)

+ Optional Decoding Kit

RS232 RS232 
SPI SPI
I2C I2C
CAN CAN

Water Analysis